JUST POWER ON 07
1.2 General Requirements
•
Do not install, use and maintain the equipment in adverse weather conditions
such as lightning, rain, snow and strong breezes (including but not limited to
handling and operating the equipment, plugging and unplugging signal connec-
tions to outdoor facilities, working at height, outdoor installations, etc.).
• Always turn off the power sourcebeforestartingany electrical work.
• Do not clean the equipment with water.
• Do not disassemble,modify, tamper with or repairthe equipment on your own.
• Regularly inspect the equipment and its accessories for damage or deterioration.
• Use a tester to check for the presence of dangerous voltage before touching any
conductor or terminal.
• If the equipment’s exterior sustains minor scratches during transportation or use,
be aware that these do not impact the equipment’s normal operation.
• If the equipment catches fire, your personal safety is paramount. If it's safe to do so,
promptly disconnect power at the main distribution box and use a carbon dioxide
(CO2), FM-200, or ABC dry powder fire extinguisher to suppress the fire.
• In case of fire, EVACUATE the building or affected area immediately. Activate the
closest FIRE ALARM system and CALL your local emergency phone number.
• Use genuine cables and accessories provided by BLUETTI.
• Keep the equipment away from heat sources or high temperatures, and do not
expose it to direct sunlight.
• Do not store the equipment with flammable or explosive materials.
• Make sure the area where you are using the equipment is well ventilated and spacious.
• Do not block or cover the vents of the equipment.
• Use the equipment for its intended purpose and avoid stacking objects on top of it
during storage or use.
• Do not move the equipment during operation as the vibrations and shocks
associated with movement may cause damage to the internal hardware.
Danger
Follow these guidelines for proper operation.
To Next Page
Loading...
