EasyManua.ls Logo

Bluetti EP800 - Page 70

Bluetti EP800
80 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
JUST POWER ON70
B040.
B041.
B042.
B043.
B044.
B045.
B046.
B047.
B048.
B049.
B050.
B051.
B052.
B053.
B054.
B055.
B056.
B057.
B058.
B059.
Inverter Overload
L2 Inverter Overload
1. Disconnect the loads on the GRID terminals while
keeping the BACKUP operation normal. Check the
power and current of the two phases on the BACKUP
terminals. If they exceed the limits and trigger an alarm,
reduce the connected loads accordingly.
2. Restart your EP800*. If the issue persists, please
contact BLUETTI support for assistance.
* See FAQ 1.
1. Log in to the App and bind your EP800. Connect to it
via Bluetooth to check for any firmware updates.
2. After successfully upgrading, restart your EP800*. If
the issue persists, please contact BLUETTI support for
assistance.
* See FAQ 1.
1. Make sure the EP800 is placed in a well-ventilated
environment.
2. Allow the EP800 to cool down and then restart*. If the
issue persists, please contact BLUETTI support for
assistance.
* See FAQ 1.
1.Make sure all connection are secure.
2. Restart your EP800*. If the issue persists, please
contact BLUETTI support for assistance.
* See FAQ 1.
1.Make sure all connection are secure.
2. Restart your EP800*. If the issue persists, please
contact BLUETTI support for assistance.
* See FAQ 1.
1.Make sure all connection are secure.
2. Restart your EP800*. If the issue persists, please
contact BLUETTI support for assistance.
* See FAQ 1.
1. Make sure the EP800 is placed in a well-ventilated
environment.
2. Restart your device*. If the issue persists, please
contact BLUETTI support for assistance.
* See FAQ 1.
Reserved
L1 Inverter Output Failure
L2 Inverter Output Failure
L3 Inverter Output Failure
Overtemperature Protection
Communication Failure
Reserved
DSP Communication Interrupted
BMS Communication Interrupted
IoT Communication Interrupted
Zero Drift Abnormal-ARM
RTC Read and Write Abnormal
Inverter Leakage Current High
Temperature 1 Abnormal
Temperature 2 Abnormal
Temperature 3 Abnormal
Temperature 4 Abnormal
Operating Ambient
Environment Abnormal

Related product manuals