EasyManua.ls Logo

BMC YH-600B Pro

BMC YH-600B Pro
92 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
YH-600B Pro User Manual V3.0
38 / 88
14. EMC Requirements
Guidance and Manufacturer’s Declaration - Electromagnetic
Emissions
This device is intended for use in the electromagnetic environment
specified below. The user of the device should assure that it is used in
such an environment.
Emissions Test
Compliance
Electromagnetic Environment -
Guidance
RF Radiated
Emissions
CISPR 11
Group 1
The device uses RF energy only
for its internal function. Therefore,
its RF radiated emissions are very
low and are not likely to cause any
interference in nearby electronic
equipment
RF Conducted
Emissions
CISPR 11
Class B
The device is suitable for use in all
establishments including domestic
establishments and those directly
connected to the public
low-voltage power supply network
that supplies buildings used for
domestic purposes
Harmonic
Emissions
IEC 61000-3-2
N/A
Voltage
Fluctuations /
Flicker
Emissions
IEC 61000-3-3
N/A
WARNING!
During operation of the device, due to electrostatic interference,
the following phenomena may occur: (1) Temporary loss of
function or degradation of performance, such as abnormal screen
display, etc. The device will recover to normal after being restarted;
(2) Automatic restart of the device. These phenomena will not
affect the normal use of the device, and will not cause permanent
performance degradation or function loss of the device.
The normal function of the product may be disturbed by strong
Electro-Magnetic Interference. If so, simply reset the product to
resume normal operation by following the instruction manual. In
case the function could not resume, please use the product in
other location.

Table of Contents

Other manuals for BMC YH-600B Pro