BMC YH-600B Pro

YH-600B Pro User Manual V3.0
29 / 88
No records.
24 00:02:00
23 00:01:54
22 07:01:00
21 06:00:00
Figure 1-16 “Records” interface-List of records Figure 1-17 “Records” interface-No Records
Select a record in the list of records, and press the On-Off / OK
Button . If the record is valid, a ribbon interface will appear,
indicating the severity of SAHS. If not, “Invalid data!” will appear,
as shown in Fig 1-18.
正 正
SAHS Severity
Indication：
Normal
Severe
SAHS Severity
Indication：
Invalid data!
Fig 1-18 “SAHS Severity Indication” interface
When operations are done, press the On-Off / OK Button
and Shift Button to exit the list of records and return to the
standby interface.
10.2.6 Accessing the “Tools” Interface
From the standby interface, press the Shift Button to switch
the yellow frame to the “Tools” icon . Press the On-Off / OK
Button to enter the “Tools” interface. There are five
options in this interface: Transfer Data (BT), Language, Erase,
About, and Exit.
The “Transfer Data (BT)” interface shows all records and allows