BMC YH-600B Pro

YH-600B Pro User Manual V3.0
35 / 88
CAUTIONS!
• Never use abrasive agents, alcohol, chlorine-containing
substances, acetone, or other solvents to clean the device.
• Do not immerse the device, the respiration kit, or the pulse
oximeter sensor in fluids, and ensure that no fluids penetrate
into the product. Do not immerse the main device in water.
• The Airflow Cannula is non-reusable, dispose of it in
accordance with local regulations.
12.2 Disinfection
If necessary, i.e. after infectious diseases, uses between patients
or if parts have become unusually dirty, you can disinfect certain
parts.
Clean YH-600B Pro parts as instructed above. Disinfect YH-600B
Pro as follows:
We recommend CaviCide
®
liquid for disinfection.
We recommend you to wear suitable gloves (e.g. house-hold or
disposable gloves) during disinfection procedures.
Disinfect the Pulse Oximeter Sensor
The pulse oximeter sensor may be surface-cleaned by wiping it
with CaviCide
®
solution.
① Detach the pulse oximeter sensor from YH-600B Pro main
device.
② Saturate a clean, dry gauze pad with the CaviCide
®
solution.
Wipe all surfaces of the pulse oximeter sensor with this gauze
pad.