BMC YH-600B Pro

YH-600B Pro User Manual V3.0
28 / 88
• Countdown Setup, allowing users to set the device to start
recording at a certain time according to their needs. The
maximum countdown time is 14 hours. When the countdown
reaches 0:00:00, the device will enter the Wearing Alert interface.
If all leads are attached properly, the device will start recording
automatically. Press and hold the On-Off / OK Button and
the Shift Button until the user exits the “Time Left” interface,
as shown in Fig 1-15.
Display(s): 60
Auto Start(min): 10
Auto Stop(h): 7
Date Setup
Countdown Setup
Exit
Starting o’clock:10
Starting min: 0
Start:No
Save and Exit
4/1/2014 17:43:10
Time Left
00:30:01
Fig 1-15 “Countdown Setup” interface
• Exit, select “Exit” to return to the standby interface.
10.2.5 Accessing the “Data” Interface
From the standby interface, press the Shift Button to switch
the yellow frame to the “Data” icon . Press the On-Off / OK
Button to enter the “Data” interface. This interface can
display eight records at most, and each record is made up of a
serial number and recording time, as shown in Fig 1-16. When
there are no records, the screen will display “No records.”, as
shown in Fig 1-17.