YH-600B Pro User Manual V3.0
21 / 88
10.1.6 Connecting the Main Device with the Respiration Kit
Connect the main device with the respiration kit by inserting the
data connector of the kit into the Flow / COM port on the right side
of the device.
10.2 Operation
WARNING!
• Do not smoke when using the device.
CAUTIONS!
• The device has no alarm system, and is thus unsuitable for
situations that need an alarm system.
• While working, the device should not be directly exposed to
airflow sources (e.g. fan), otherwise the accuracy of airflow
monitoring will be affected.
• Do not use the device in nuclear magnetic environments or
where there is high electromagnetic interference.
• If the device performance has unexplainable changes, if
water has entered the enclosure, if the enclosure is broken,
or if the device has been dropped from a high place or hand,
discontinue use and contact BMC.
10.2.1 Accessing the Initial Interface
Press and hold the On-Off / OK Button for five seconds,
and the initial interface will appear, as shown in Fig 1-10.
Fig 1-10 Initial interface
To Next Page
Loading...