BMC YH-600B Pro

YH-600B Pro User Manual V3.0
84 / 88
Fig. 2-60
(2) Select the channel to be added under the “input” bar and click
“OK” to add the channel. The newly added channel will be
displayed above the channel title bar.
 Delete Channels: Right click the corresponding channel name
in the channel title bar, click “Delete”, or left click the channel
and drag it out of the channel title bar to delete the channel.
The deleted channel will not be displayed in the channel title
bar.
 Move Channels: Click the channel name and drag it vertically
to move the channel.
2.5.3 Add and Delete Events
 Add Events: Place the cursor at the starting point of the event,
left click and drag it to add the event, as shown in the Fig.
2-61.