BMC YH-600B Pro

YH-600B Pro User Manual V3.0
42 / 88
Recommended Separation Distance Between Portable and Mobile RF
Communication Equipment and the Device.
The device is intended for use in the electromagnetic environment in
which radiated RF disturbances are controlled. The user of the device
can help prevent electromagnetic interference by maintaining a
minimum distance between portable and mobile RF communication
equipment (transmitters) and the device as recommended below,
according to the maximum output power of the communication
equipment.
Rated
Maximum
Output
Power of
Transmitter/
W
Separation Distance According to Frequency of
Transmitter/m
150 kHz ~ 80
MHz
80 ~ 800
MHz
800 MHz ~ 2.5
GHz
0.01
0.12
0.12
0.23
0.1
0.38
0.38
0.73
1
1.2
1.2
2.3
10
3.8
3.8
7.3
100
12
12
23
For transmitters rated at a maximum output power not listed above, the
recommended separation distance d in meters (m) can be estimated
using the equation applicable to the frequency of the transmitter, where
P is the maximum output power of the transmitter manufacturer.
Note 1: At 80 ~ 800 MHz, the higher frequency range applies.
Note 2: These guidelines may not apply in all situations. Electromagnetic
propagation is affected by absorption and reflection from structures,
objects and people.