BMGi E8 - Actuator Arm Setup; Determine Pull or Push to Open

How to determine if I have a pull or push to open setup
Road/outside property
Inside property
Road/outside property
Inside property
Road/outside property
Inside property
Road/outside property
Inside property
Actuator
placement
Actuator placement
Actuator placement
PULL TO
OPEN
PULL TO
OPEN
PUSH TO
OPEN
PUSH TO
OPEN
Actuator
placement
Pull to open setup A
Actuator arm mounted on the
inside of the propertypulling the
gate into the property to open.
Go to page 20 for setup
Pull to open setup B
Actuator arm mounted on the
outside of the property pulling
the gate outwards to open.
Go to page 20 for setup
Push to open setup A
Actuator arm mounted on the
outside of the property pushing
the gate inwards to open.
Go to page 26 for setup
Push to open setup B
Actuator arm mounted on the
inside of the property pushing
the gate out towards the road
to open.
Go to page 26 for setup
17