Kit Includes
Standard Packaging of the swing gate opener kit includes:
Single = 1 leaf Double = 2 leafs
Actuator Arm: 1 x for single or 2 x for double
Cardboard Template: 1 only
Primary Post Bracket: 1 x for single or 2 x for double
Secondary Post Bracket: 1 x for single or 2 x for double
Gate Bracket: 1 x for single or 2 x for double
Rubber Gate Stop: 1 only
Release Keys: 2 only
Primary Bracket Bolts: Not supplied (Single x 4 or Double x 8)
Secondary Bracket Bolts: 2 x for single or 4 x for double
Gate Bracket Bolts: 2 x for single or 4 x for double
Rear Mounting Bolts: 1 x for single or 2 x for double
Release Bolts: 1 x for single or 2 x for double
Small Bracket set (3): 1 only
Control Box: 1 only
Main Control Board
EGA-04: 1 only
Receiver: onboard
Remotes/fobs: 2
12v Battery: 1 only (if solar)
Regulator: 1 only (if Solar)
45Watt Solar Panel: 1 only (if Solar) with 10mtrs cable
+ mounting bracket
Transformer 16VAC: 1 only (if Electric)
Conduit: 1 small piece only
Cable: 6m for double kits
(across driveway for second actuator)
Junction box: 1 for double kit only
PLEASE NOTE:
POST BRACKET BOLTS AND CONTROL BOX MOUNTING BOLTS
ARE NOT SUPPLIED
To Next Page
Loading...