BMPRO CONNECT+ - Winegard

WINEGARD
To set up Winegard:
1. In the page navigation sidebar, at the bottom, select the settings icon.
2. Press Winegard Settings.
Logging into the Winegard network
1. Press the search button to search for the available networks.
2. Select the desired network and enter the password or enter the network
name and password. If your network is not seen, make sure the Winegard
is turned on and scan again.
3. After the network name and password are entered correctly, press Join.
Internet Preferences
You can select from the following options:
9 4G: Connect to a 4G network. SIM card required.
9 WiFi: Connect to an external WiFi network.
9 Internet OFF: No internet source selected.
You can only set up Winegard if your RV is equipped with a Controller.
21