BMPRO CONNECT+ - Motor Settings; Load Shedding Settings

MOTOR SETTINGS
If your model supports zero point leveling, you can use the Motor Settings
screen to perform zero point calibration.
To access Motor Settings:
1. In the page navigation sidebar, at the bottom, select the settings icon.
2. Press Motor Settings.
LOAD SHEDDING SETTINGS
The Load Shedding Settings screen is used to configure load shedding.
To access Load Shedding Settings Settings:
1. In the page navigation sidebar, at the bottom, select the settings icon.
2. Press Load Shedding Settings.
Depending on the type of leveling system installed, the tongue jack may not be
available.
38