Run Time Limits
Used to set the minimum time the generator will continue to run for after the
target battery voltage and/or temperature is reached.
The maximum time is the total run time that the generator will operate
to reach the target battery voltage and/or temperature. If targets are not
reached and the generator run time exceeds the maximum run time limit set in
the Energy Settings, the generator will automatically turn off.
Quiet Time
Used to choose the hours when the generator will always be turned off, even
if AGS has been enabled.
If you are using Quiet Time, ensure the time is correct on the Controller. For help
setting the time, refer to FAQs and Troubleshooting.
37
To Next Page
Loading...
