TELEPHONE
Selecting the Telephone function on
the Monitor screen will call up a rotary
dial display. The telephone can be
dialed with the rotary knob by turning
the knob and pressing it when the
desired digit is highlighted. Once the
number is input, the call is initiated by
pressing the send/end button at the
left of the Monitor.
All telephone programming is carried
out through the handset as on other
telephone models.
Other features of the monitor
telephone control include:
Memory storage and recall
Information on signal strength and
call timer
Top 8 number storage
Emergency call feature
- Displays 911 or Assist.
- Displays the vehicles current
coordinates in latitude and
longitude along with the street
name (if the street is on the
digitized map database).
CODE FUNCTION
The familiar BC code function is
carried over to the On-board Monitor
system. A four digit code can be
entered into the system that will
disable the vehicle from starting as
with previous systems.
12
On-Board Monitor and Navigation Systems
To Next Page
Loading...
Need help?
General
