ON-BOARD MONITOR CONTROLS & INDICATORS
AUDIO SYSTEM
Operation of the audio system (radio/tape/CD) is similar to current systems installed in other
models. The major difference is that the display of stations and settings is through the LCD
panel.
Switches the
audio system
on/off (PUSH)
and adjusts the
volume
(ROTATE).
Both the radio
and the
monitor display
are switched
Toggles the
audio display in
the monitor
back to the
previous
screen.
Amber LED
illuminated
when radio is
on.
Tape program and
eject buttons.
1-6 buttons correspond to stored radio stations (12+6
Auto) and CD selections (CD 1-6 selection).
Weather Band, FM - AM, Dolby and Mode Selection.
Mode = Radio, Tape or CD function.
TONE-SELECT
Tone: Adjusts the bass, treble, balance and
fader using the tone & arrow buttons.
Select: provides choice of station selection
method, ie: Manual, Scan, Scan Sensitivity.
Arrow rocker switch.
Adjusts the tone settings
and is used for the
seek/scan function for the
radio, tape and CD track.
8
On-Board Monitor and Navigation Systems
To Next Page
Loading...
Need help?
General
