Preferred Method- CIRCLE
Driving the vehicle two complete
circles - both counterclockwise and
clockwise - will cover all directions.
Press Start, the speed of the vehicle
must not exceed 6 MPH during the
calibration.
Press Stop when you have completed.
The monitor will indicate that the
navigation computer has seen all
directions of travel by displaying
Calibration Successful.
Alternate Method - BLOCK
Driving the vehicle around a block
several times will also allow the
navigation computer to see all
directions of travel.
The monitor will automatically indicate
when this section of the calibration is
completed.
45
On-Board Monitor and Navigation Systems