COMPASS STEP 3 - REAR WINDOW DEFROSTER COMPENSATION
This procedure is only possible after
steps #1 and #2 have been
successfully completed.
The navigation computer determines
the magnetic field generated by the
defogger grid so it can compensate for
this when the rear defogger is switched
on.
Switch the rear defogger ON and
confirm the input on the Monitor
screen. Wait for acknowledgment
by the navigation system.
Switch the rear defogger OFF and
confirm the input on the monitor
screen. Wait for acknowledgment
by the navigation system
FINISH CALIBRATION
Once all of the required calibration
procedures have been carried out,
press the finish calibration button.
This will display whether the calibration
process was successful or if faults or
problems have occurred that require
troubleshooting with the DIS .
49
On-Board Monitor and Navigation Systems
To Next Page
Loading...
Need help?
General
