CALIBRATION PROCEDURES
The navigation system calibration
screen menu is called up from the
information menu screen.
Select Vehicle Position from the
information screen, then press and
hold the menu button for a few
seconds. The system will enter the
calibration mode.
Press Continue to proceed with the
desired system calibration.
The first Dealer calibration screen provides five selections. A full dealer calibration
procedure consists of carrying out all five selections.
Though they can be done individually
with positive results, it is recommended
to complete all five steps to achieve
consistent positive results.
Start at Setting Car Parameters and
end with Finish Calibration.
NOTE: If a new navigation computer is
being calibrated for the first time, the
individual buttons will not be
selectable.
The system will automatically go into a
fixed sequence calibration requiring all steps be performed.
39
On-Board Monitor and Navigation Systems
To Next Page
Loading...
Need help?
General
