77
On-Board Monitor and Navigation Systems
Review Questions
1. List the most significant changes made to the Mk-2 navigation computer over the
previous Mk-1. Describe the changes between Mk-2 and Mk-3.
2. How can the signal provided by the gyro sensor to the navigation computer be
checked?
3. Describe how the
display
signals are transmitted from the navigation computer to the
MIR and board monitor.
4. What step is necessary before loading the navigation computer operating software CD
on a newly replaced Mk-3 navigation computer? Where can the software status be
confirmed after it has been loaded?
5. How is the VIN entered into the Mk-2 or Mk-3 navigation computer?
6. Describe the situations that would require a full calibration be performed on a Mk-1
navigation computer.
7. How are the On-Board Monitor input signals (function requests) received by the Nav.
computer, Radio, IKE, IHKA and Telephone?
To Previous Page
Loading...
Need help?
General
