Remove spacer bushing 1 from
the wheel hub.
Install front wheel
Malfunctions may occur
during control interventions
by ABS or ASC if a wheel other
than the standard wheel is in-
stalled.
Please see the information on
the effect of wheel sizes on the
ABS and ASC chassis control
systems at the beginning of this
chapter.
Threaded fasteners not
tightened to the specified
torque can work loose or their
threads can suffer damage.
Always have the tightening
torques checked by a specialized
workshop, preferably an
authorized BMW Motorrad
retailer.
Mount spacing bushing 1 on
left side in wheel hub.
The front wheel must be
installed right way round to
rotate in the correct direction.
Observe the direction of rota-
tion arrows on the tires or on the
rim.
Roll front wheel into front
suspension.
Lift front wheel and install
quick-release axle 1.
Remove front wheel stand and
firmly compress front forks. Do
not actuate handbrake lever at
the same time.
Mounting front wheel stand
( 130).
7
126
z
Maintenance
To Next Page
Loading...
