9
User's Manual
6. Rotation
This light flickers when the volume LEVEL
or the INPUT SELECTOR is being rotated.
7. Level
Rotate this manual control clockwise to
increase the volume. The dB level will appear
in the front panel display. Note that the control
does not rotate when the remote is used.
8. Reset
This is used to Reset the microprocessor
and clear all surround and preset settings. In
normal use, you will not use this feature. See
the Troubleshooting section for details.
9. Power
This turns the Theater Grand Processor on
or off. It is a non-latching momentary button.
10. Illuminated Logo Panel
11. Tuner Presets
1-10
Selects your favorite stations, previ-
ously stored as presets.
+10
Selects presets above 10. Pressing this
a second time accesses station presets
above 20, a third time above 30, the
fourth time to select 40.
12. Tuner Controls
DIRECT
Used to enter a station’s frequency
directly using the 0 - 9 keys.
MEM
Stores the current tuned station into
preset memory.
AM/FM
Selects the AM or FM band.
UP/DOWN
Switch to stations above or below the
frequency of the current station.
13. Tone
To change the Tone, first press BASS or
TREBLE and then press INCREASE or
DECREASE to suit your taste. The display will
show the change in dB level for reference.
Press BASS or TREBLE again to return to
the normal display. The levels are retained.
14. Full Automatic Operation
When this is engaged, the Theater Grand
Processor will automatically switch to the next
input which starts to play. For example, if you
turn on and press Play on your CD player, the
Theater Grand Processor will switch to CD.
When you turn on and press Play on your
VCR, it will select the VCR1 input.
If the Theater Grand Processor is turned
off while the Auto mode is engaged, it will turn
on and select an input whenever an input
becomes active. For example, if you turn on
your CD player and press Play, the Theater
Grand will turn on and select the CD input.
Note: We recommend that you turn off
this feature if you are selecting the inputs
manually, or recording.
15. Manual Input Selector
Rotate this to cycle through the different
inputs. The selected input appears in the display.
CD
VAUX1
VCR1
LD/DVD
DBS/BS
PHONO
TUNER
DAT/TAPE
Note: After you have selected an input,
you should check that the Theater Grand
Processor is set to the desired surround
mode (or the stereo mode).
Front Panel Features
To Next Page
Loading...