BT RECONNECT? Enables the operator to change the reconnect mode setting. For iPad connection only.
Printer will NOT automatically attempt to restore a connection if it is dropped. default
Printer will automatically attempt to restore a connection if it is dropped.
BT OPER MODE? Enables the operator to change the connection mode setting.
Bluetooth Low Energy Mode
WIRELESS? Enables the operator to change the connection mode setting. Recommend that Wi-Fi be disabled is printer if so equipped
and you are using a different interface other than Wi-Fi.
Disable Wi-Fi connection.
Printer will try to connect to the Static IP address the Wi-Fi was originally configured for
Printer will try to connect to the DHCP IP address the Wi-Fi was originally configured for
EXIT AND SAVE! Will save any changes made to the above menu options.
If you wish to save the new value then press TEST, if not press MENU.
JUST EXIT? Will exit the menu options without saving any changes.
If you want to exit without saving the new value then press TEST, if not press MENU.
Click here to return to > Table of Contents
To Next Page
Loading...
