Table of Contents Page
FCC Notice & Warranty Information 2
1.0 Important Safety Information 3
2.0 Unpacking the printer 4
3.0 Introduction 5
4.0 Installation 7
5.0 Media Supply 10
6.0 Media Load Procedure 12
6.1 Media Width Adjustment 13
7.0 Configuration 14
8.0 Standard Interface Pinouts 15
9.0 Thermal Paper – Theory & Specifications 16
10.0 Maintenance and Adjustments 17
10.1 Paper Guide and Print Head Assembly 17
10.1.1 Black Mark Opto Sensor 18
10.1.2 Load Opto Sensor 19
10.1.3 Thermal Print Head 20
10.1.4 Thermal Print Head Replacement 22
10.1.5 Platen 23
10.2 Cutter Assembly 24
10.3 General Cleaning 24
11.0 Logic Board 25
11.1 Logic Board (Removal) 25
11.2 Logic Board (Installation) 25
12.0 Spare Parts List 26
13.0 Troubleshooting Guide 30
Appendix A - CONTROL PANEL 32
Appendix B - VERTICAL PRINTER INSTALLATION 36
Appendix E - ETHERNET PARAMETERS 37
Appendix F – TESTING A LEMUR 40
Appendix G – DOWNLOADING SOFTWARE COMMANDS 41
Appendix H – CHANGE SPECIAL HEAD SETTING 42
Appendix I – BLUETOOTH CONNECTION 43
Appendix J – CONFIGURE WI-FI CONNECTION 48
Appendix K – WINDOWS DRIVER INSTALLATION GUIDE 52
Appendix L – MAC DRIVER INSTALLATION GUIDE 52
Appendix M – ADHESIVE STOCK 53
Appendix N – SERVICE PLANS 54
Appendix O– TECHNICAL SUPPORT 54
Appendix P – REFERECE DRAWING 55
To Next Page
Loading...
