Need help?Do you have a question about the Boca Systems Lemur and is the answer not in the manual?
Steps and items to check when receiving and unpacking the printer.
Overview of the assembly guiding tickets to the thermal print head and its components.
Information on the integrated cutter knife mechanism and its maintenance.
Instructions for cleaning the printer's interior from dust accumulation.
Information on the printer's printed circuit boards and their repair.
Steps to diagnose and resolve issues where the printer shows no power.
Troubleshooting steps for print quality issues with white voids.
Solutions for problems where the printer skips tickets during the printing process.
Specific ticket load procedure for Lemur-2 series printers.
Ticket load procedure specific to the Lemur-R printer model.
Instructions for Mac users connecting via USB/HID or Ethernet.
Instructions for Mac users connecting via print drivers or USB.
General| Category | Printer |
|---|---|
| Manufacturer | Boca Systems |
| Model | Lemur |
| Print Method | Direct Thermal |
| Resolution | 203 dpi |
| Print Technology | Thermal |
| Print Speed | Up to 10 inches per second |
| Interface | USB, Ethernet, Serial |
| Memory | 8 MB RAM |
| Operating Temperature | 5°C to 40°C (41°F to 104°F) |
To Next Page
