Boge base control User Manual

Safety 2.2 Special Safety Information
Page 6 BOGE base control for scroll compressors
2.2 Special Safety Information
Switch Cabinet
The control is housed in a switch cabinet.
The control unit of the control can be found at the front of the switch cabinet.
The control may only be operated via the control unit when the switch cabinet
is closed.
Please note that only settings that can be applied via the control unit of the
control may be changed using these operating instructions.
Emergency Stop
Function / Main Switch
The emergency stop function serves to avert or prevent a prevailing emer-
gency situation, where such a situation is the result of conduct by individuals
or an event posing an unexpected danger.
The emergency stop function is provided through the main switch. When the
main switch with emergency stop function is pressed, compressor operation
stops immediately and the switch cabinet and control are no longer live.
Dangerous voltage may still be present on the supply terminals even though
the machine is disconnected from the grid.
The main switch is not located on the control unit of the base control; it is in-
stead in a highly visible location on the front of the scroll compressor housing.
WARNING
Risk of Electric Shock
Live parts are located inside the switch cabinet. There is a risk of electric
shock when the switch cabinet is opened.
 Never open the switch cabinet during operation.
 Only operate the control when the switch cabinet is closed.
 The switch cabinet may only be opened by an authorized and qualified
electrician.
Please note:
– Press the main switch to avoid or prevent an emergency situation.
– In normal operation the Off key should be pressed on the control to prop-
erly shut down the compressor.
– In addition, always press the main switch when carrying out inspections
or work on the compressor or switch cabinet.

Boge base control Specifications

General

Brand	Boge
Model	base control
Category	Control Unit
Language	English