BOGE base control for scroll compressors Page III
Table of Contents
Table of Contents
Part 1:
About these Operating
Instructions
1.1 Who are these Operating Instructions aimed at?........................ 1
1.2 Content of these Instructions........................................................ 1
1.3 Other Important Documents .......................................................... 2
1.4 Guide for Reading........................................................................... 2
Symbols and Typographic Aids ........................................................ 2
Structure of Warning Notices............................................................ 3
Part 2:
Safety
2.1 General Safety Information............................................................ 5
Prior to Commissioning and Operation............................................. 5
Intended Use .................................................................................... 5
Reasonably Foreseeable Misuse ..................................................... 5
2.2 Special Safety Information............................................................. 6
Switch Cabinet.................................................................................. 6
Emergency Stop Function / Main Switch .......................................... 6
Changing Parameters / Settings....................................................... 7
Data Security .................................................................................... 7
Damage to the Control Unit .............................................................. 7
2.3 Operator and Personnel................................................................. 7
Personnel Requirements .................................................................. 7
Obligations of the Operator............................................................... 8
Obligations of Personnel................................................................... 8
Part 3:
Layout and Function
3.1 Operating Principle of the Control ................................................ 9
Basic Tasks of the Control................................................................ 9
Use as a Lower-level Control in the Compressor Network ............... 9
3.2 Layout of the Control Unit ........................................................... 10
LCD Display (1) .............................................................................. 11
"Fault" and "Ready" Indicator Lamps (2 and 3) .............................. 11
Info and Enter Keys (4 and 5)......................................................... 11
On and Off Keys (6 and 7).............................................................. 12
To Next Page
Loading...
Need help?
General
