Boge base control - Page 6

Table of Contents
Page IV BOGE base control for scroll compressors
Part 4:
Display and Operation
4.1 Description of Display Symbols .................................................. 13
4.2 Description of the Displays and Navigation............................... 14
Main Display ................................................................................... 14
Additional Displays ......................................................................... 16
Part 5:
Setting Parameters
5.1 Unlocking Code-protected Parameters ...................................... 19
5.2 Changing Individual Parameters................................................. 20
Parameter Codes............................................................................ 20
Compressor Servicing Interval: Restart the Counter / Change the Start
Value............................................................................................... 20
Motor Servicing Interval: Restart the Counter / Change the Start Value
21
Change Target Pressure Values (p
max
and p
min
) ........................... 22
Activating / Deactivating the Auto-Restart Function ....................... 23
Activating / Deactivating the External Output Release ................... 25
Performing Leakage Measurement (without code release) ............ 27
Part 6:
Troubleshooting
6.1 Message Types ............................................................................. 31
6.2 Processing Messages .................................................................. 31
6.3 List / Meaning of Message Codes ............................................... 32
6.4 Acknowledging Messages ........................................................... 33
Part 7:
Servicing
7.1 Cleaning the Display .................................................................... 35
7.2 Updating the Software.................................................................. 35