BOGE base control for scroll compressors Page 1
About these Operating Instructions
1.1 Who are these Operating Instructions aimed at?
Part 1: About these Operating Instructions
1.1 Who are these Operating Instructions aimed at?
These operating instructions are aimed at end customers of BOGE who have
purchased a scroll compressor and wish to operate it using the compressor
base control.
In addition to reading these instructions, the user must meet the following pre-
requisites in order to ensure professional operation of the control. S/he must:
– have an understanding of the compressor
– have an understanding of the accompanying operating instructions
– be classified as qualified personnel or trained personnel with technical
background knowledge in the field of compressed air technology (see also
"Personnel Requirements", page 7).
1.2 Content of these Instructions
These operating instructions deal exclusively with the functionality, operation
and parametrization of the base control.
The following content and work descriptions do not form part of these operat-
ing instructions:
– All safety information on the compressor. This is part of the compressor
operating instructions.
– Work such as electrical commissioning or repairs to the control.
– Work on the control that requires the switch cabinet to be opened, for
example installing updates.
– Work on the compressor and its accessories (e.g. installation or commis-
sioning).
The above-mentioned work must only be carried out by an authorized, quali-
fied electrician or BOGE Service personnel.
BOGE recommends having the control, compressor and accessories set up
and commissioned by BOGE Service personnel. Maintenance and repair work
on the control should also be carried out by BOGE Service personnel.
Should you have any questions about this product, please contact
Product Support on:
Telephone: +49-520-660-1140
If you require Service assistance, please contact BOGE Service on:
Telephone: +49-520-660-1100
To Next Page
Loading...
Need help?
General
