bolid S2000M - Page 3

S2000M MAINTENANCE GUIDE
3
2.2.3.5 Request for loop state 43
2.2.3.6 Alarm loop resistance measurement 43
2.2.3.7 Console date and time setting 44
2.2.3.8 Printing event buffer 45
2.2.3.9 ‘S2000-IT’ phone communicator message buffer cleaning 45
2.2.3.10 Alarm message indication reset 45
2.2.4 Device and console programming functions 46
2.2.4.1 Date and time settings and clock correction 46
2.2.4.2 RS-485 device address changing 47
2.2.4.3 2-wire devices adresses changing and programming 47
2.2.4.4 Console extra settings 48
2.2.4.5 Password management 49
2.2.4.6 Console address setting in prorgamming mode 51
2.2.4.7 Console address setting in personal computer work mode 51
2.2.4.8 Console RS-232 interface operative mode settings 51
2.2.4.9 The ring RS-485 interface operative mode settings 52
2.2.4.10 Console entering into programming mode 53
2.2.5 Reset settings to default values 53
2.2.6 Console version update 54
3 STORAGE 54
4 TRANSPORTATION 54
5 CERTIFICATION INFORMATION 54
6 INFORMATION ABOUT MANUFACTURER 54
7 WARRANTY 55
Appendix A ‘S2000M’ console dimensions 56
Appendix B Zone status list 57
Appendix С The list of messages being displayed 61