FIRE AND ALARM CONSOLE
2
TABLE OF CONTENTS
1 Description of the product and its operability 4
1.1 Purpose 4
1.2 Specifications 5
1.3 Delivery set 14
1.4 Description the product and capabilities 14
2 Maintenance 15
2.1 Preparation the product 15
2.1.1 General information 15
2.1.2 Connection console and devices to RS-485 interface instructions 16
2.1.3 Setting device configuration parameters 18
2.1.4 Address setting of addressable expanders 19
2.1.5 Printer connection to console or ‘ARM S2000’ 19
2.1.6 Using the console for “ARM Orion” redundancy 20
2.1.7 Console configuring 25
2.1.7.1 General information 25
2.1.7.2 Adding devices into console database and partition creation 26
2.1.7.3 Setting partition control rights and password programming 27
2.1.7.4 Setting control by system relay outputs 29
2.1.7.5 Setting message transmission 30
2.1.7.6 Entry zone settings 31
2.1.7.7 Setting user messages 31
2.1.7.8 Controlling ‘S2000-BI’ devices settings 31
2.1.7.9 Using the console for creating of systems controlling gas, powder or aerosol fire
extinguishing installations based on "S2000-ASPT" devices 32
2.1.7.10 Using the console with sprinkler or drencher extinguishing units based on devices
"POTOK-3N" 33
2.1.7.11 Using the console with the phone communicator "S2000-IT" 33
2.1.8 Console mounting 34
2.1.9 Prevention of the accidents at device installation 34
2.1.10 Console first starting 34
2.2 Using console 34
2.2.1 Displaying, viewing and printing device messages 35
2.2.2 Partition arming and disarming 37
2.2.2.1 Console controlling of partitions 37
2.2.2.2 Partition control at ‘S2000-K’ keyboards 39
2.2.2.3 Touch Memory and Proximity card partition control 39
2.2.3 Device control functions 39
2.2.3.1 Arming/disarming control of device alarm loops 39
2.2.3.2 Device alarm reseting 41
2.2.3.3 Manual external device outputs control 41
2.2.3.4 ‘S2000-ASPT’ device control 42
To Next Page
Loading...
