bolid S2000M - Page 59

S2000M MAINTENANCE GUIDE
59
State Description Displayed
"ARMING DELAY"
Zone is arming ( the arming command has been
entered but the result of operation has not yet been
known) or arming delay is being counted
ARMING...
"ZONE ARMED"
Zone is normal armed for alarm loops or alarm
addressable detectors, or zone is normal controlled
for another loops and addressable detectors,
including fire ones
ARMED
"BATTERY
FAILED"
The backup power supply (storage battery) has
failed
BAT FAIL
"AC POWER
FAILED"
The primary (AC) power supply has failed
AC FAIL
"POWER FAILED" The device power supply is out of range
POWER FAIL
"MANUAL
EXTINGUISHING"
The automatically launching mode of extinguishing
equipment is off
EX MANUAL
"THE PUMP IS ON" The pump is operating
PUMP ON
"THE PUMP IS OFF" The pump is off
PUMP OFF
"AUTO
EXTINGUISHING"
The automatically launching mode of extinguishing
equipment is on
EX AUTO
"AUXILIARY
ALARM"
Auxiliary alarm loop is broken
AUX ALARM
"AUXILIARE
NORMAL"
Auxiliary alarm loop is OK (is not broken)
AUX NORM
"RELAY
DISCONNECTED"
The communication between the console and relay
output has been lost with it status being unknown
and the console controlling being disabled.
It is typically happens when:
1) the communication between the console and
relay unit “S2000-KPB” connected to it via RS-485
line has been lost;
2) the communication between “S2000-ASPT” and
relay unit “S2000-KPB” connected to it via RS-485
line has been lost;
3) the communication between "S2000-КDL"
device and its 2-wired "S2000-SP2" relay unit has
been lost.
RL DISCONN
"OPEN RELAY
OUTPUT"
Open circuit failure of controlling relay output
RL TRBL O
"RELAY OUTPUT
SHORT CIRCUIT"
Short circuit failure of controlling relay output
RL TRBL S
"FIRE EQUIPMENT
NORMAL"
Alarm loop controlled fire equipment is operative
NO TROUBLE