Bontrager NODE 1 - Power Calibration; Power Calibration Procedure

Calibrating Power
To get the most accurate data, you should calibrate the power function before
every ride.
NOTE
In Ride Mode, scroll to PWR.
Press
.
CALIB? (Calibrate?) appears.
1.
2.
To calibrate, press
.
As the NODE calibrates, the 0 (zero) of speed  ashes each segment in a
circular pattern.
Then DONE (done) appears, and after one second the NODE returns to the
PWR function.
3.
If CALIB? appears, the NODE returns to the calibration screen because the
calibration procedure failed. Repeat steps 2 and 3, or see Troubleshooting.
To return to PWR, press .4.
4.
3.
1. 2.