Bontrager NODE 1 - Setting Altitude; Calibrating Altimeter

4.
3.
When % appears, toggle to see current (CUR) and maximum (MAX).4.
Hold
for three seconds to go to Setting mode.
When BIKES appears, scroll
or to SYSTEM.
Press
.
1.
2.
3.
To see the gain (+) or loss (–) in Trip or Total, scroll to that feature and
toggle
.
3.
Setting Current Altitude
The altimeter measures your altitude based on air pressure and temperature. Air
pressure changes with the weather, so for the best accuracy you should set the
current altitude before your  rst use and again whenever you are near a point of
reference of known altitude.
1. 2. 3.
(3 sec)
(or)