2.10 Markings and signs to be attached by the operator
The operator is obligated to label the pumped medium and the flow
direction on the rotary lobe pump (see chapter
Ä
Chapter 4.5.3
“Checking the flow direction” on page 83).
The operator may also be required to attach additional markings
and signs on or around the Börger machine.
These additional markings and signs may relate to regulations for
wearing personal protective equipment, for example.
2.11 Safety instructions for operating personnel
The Börger machine may only be operated while it is in perfect
working condition and only for its intended purpose, in a safe and
risk-conscious manner having regard to this operating manual. All
malfunctions must be rectified immediately, especially those
affecting safety.
Every person assigned with commissioning, operation or mainte-
nance work must have fully read and understood this operating
manual beforehand – specifically
Ä
Chapter 2 “Safety”
on page 13. Consulting the manual during work is already too late.
This applies especially to personnel that only work occasionally on
the Börger machine.
The operating manual must always be kept accessible next to the
Börger machine.
No liability will be assumed for any damage and accidents caused
by non-compliance with the operating manual.
Adhere to the applicable accident prevention regulations and all
other generally recognized safety regulations and guidelines for
occupational health at work.
Clearly specify the responsible parties for the various maintenance
and repair tasks and adhere thereto. Only then can handling errors
be avoided, especially in dangerous situations.
The operator must make personal protective equipment mandatory
for operating and maintenance personnel. This applies to safety
shoes, protective goggles and protective gloves. Always wear this
protective equipment when working on the Börger machine.
Safety
BA-Classic FL_en-US, 03.05.2018 www.boerger.de / www.boerger.com 29
To Next Page
Loading...