NOTE!
Contamination caused by production residues!
Börger machines may contain residues from the manufacturing
process, e.g. grease or oil. Contamination caused by packaging
and transport cannot be ruled out.
— If necessary, thoroughly rinse the Börger machine with a suit-
able agent as part of the test run (
Ä
Chapter 5.1 “Commis-
sioning” on page 89) while adhering to the limits before com-
missioning the machine for the first time.
5.1 Commissioning
NOTICE!
Risk of damage to the mechanical seal due to a lack of
quench fluid!
Risk of damage to the mechanical seal due to a lack of quench
fluid!
— The heat-absorbing quench fluid prevents the mechanical
seal from running dry and captures any medium that enters
the intermediate chamber due to leaks in the mechanical seal.
—
This quench function also prevents the gear unit from being
damaged by the ingress of medium.
— Make sure that the fill level in the intermediate chamber is suf-
ficient.
Production residues!
Quench fluid
Operation
BA-Classic FL_en-US, 03.05.2018 www.boerger.de / www.boerger.com 89
To Next Page
Loading...