4.3 Storage and interim storage
4.3.1 Storage
NOTICE!
Inadequate maintenance can result in malfunctions and
damage!
— When the machine is stored for longer periods, rotate the
shafts several times after about six months (or more often,
depending on the storage conditions), according to
Ä
Chapter
4.5.1 “Checking smooth running following storage and long
downtimes” on page 80.
— This way the gears, bearings and shaft seals are moved
and coated again with lubricant.
If the Börger machine is not used immediately, then appropriate
storage conditions are as important as the correct installation and
maintenance for subsequent trouble-free operation.
Transportation, Storage and Installation
BA-Classic FL_en-US, 03.05.2018www.boerger.de / www.boerger.com58
To Next Page
Loading...