Borger Classic FL 776 - Electrical, hydraulic and PTO shaft connection

4. Check the screws used to fasten the Börger machine to the
base frame and retighten them, if necessary
.
4.4.5 Electrical, hydraulic and PTO shaft connection
NOTE!
Integration into the EMERGENCY ST
OP system
A Börger machine must be integrated in an EMERGENCY ST
OP
system.
— It is only permissible to do without an emergency stop device
if the emergency stop device would not reduce the stopping
time and if it would not enable the special measures required
to deal with the risk to be taken.
— The normal shutdown equipment must then be labeled
accordingly.
The installation of the Börger machine must have been concluded
completely before the electric or hydraulic connections are made
or the PT
O shaft is connected.
EMERGENCY STOP
system
Transportation, Storage and Installation
BA-Classic FL_en-US, 03.05.2018 www.boerger.de / www.boerger.com 73