6. Reattach the coupling guard (1) correctly
. Retighten all fas-
tening screws.
7. Check the screws used to fasten the Börger machine to the
base frame and retighten them, if necessary
.
The correct belt pre-tension or chain tension is necessary for cor-
rect belt drive or chain drive functionality and a long service life for
the V-belts/chains.
NOTE!
V
-belt/chain guard
— The V-belt/chain guard is a safety-relevant protection compo-
nent. It prevents personnel from reaching into rotating parts.
Personnel:
n
Mechanics
Protective equipment:
n
Occupational safety clothing, chemical
resistant
n
Safety shoes
n
Safety gloves, chemical-resistant
n
Safety goggles
Special tool:
n
T
ools, general
— Read and follow the safety instructions detailed in
Ä
Chapter
2.12 “Safety instructions for maintenance and rectifying mal-
functions” on page 30.
— Read and observe the instructions from the V-belt or chain
manufacturer in the appendix.
— To the extent necessary, amply secure the surrounding area
when performing installation. Cordon off the working area with
a red and white safety chain and a warning sign.
1. Open the retaining clamps (2) on the V
-belt/chain guard and
lift off the protection cover (1).
2. Check that the V
-belts or chains are positioned correctly and
that the pre-tension is correct according to the manufacturer's
specifications.
3. Put the protection cover (1) of the V
-belt/chain guard with the
pins back into the corresponding bores of the base frame and
fasten the cover with the retaining clamps (2).
Version with belt or chain
drive
Transportation, Storage and Installation
BA-Classic FL_en-US, 03.05.2018www.boerger.de / www.boerger.com72
To Next Page
Loading...