3.3 Technical data
Börger machines are configured individually for the application
requirements. This leads to a wide range of variations that have
been optimized for specific applications. Therefore, only the data
of some of the standard versions can be listed here as examples.
Detailed specifications for your Börger machine or unit can be
found in the data sheet and the individual dimensional drawing
sent when the machine was ordered.
Please contact Börger customer service if you require a copy of
this drawing.
3.3.1
Dimensions
Dimensions without attachment parts
Dimensions approx. [mm] approx. [inch]
FL 518 FL 776 FL 1036 FL 518 FL 776 FL 1036
D 311 373.5 395 12.24 14.70 15.55
E 687 749.5 791 27.05 29.51 31.14
F 551 551 551 21.69 21.69 21.69
G 340 340 340 13.39 13.39 13.39
H 290 290 290 11.42 11.42 11.42
J 325 325 325 12.80 12.80 12.80
ØK 48 48 48 1.89 1.89 1.89
L 155 155 155 6.10 6.10 6.10
M 110 110 110 4.33 4.33 4.33
N G½ G½ G½ G½ G½ G½
O 240 240 240 9.45 9.45 9.45
Rotary lobe pump without
attachment parts
Product Description
BA-Classic FL_en-US, 03.05.2018 www.boerger.de / www.boerger.com 49
To Next Page
Loading...