DANGER!
Risk of fatal injury due to electric power!
There is an immediate risk of fatal electric shock if live compo-
nents are touched. Damage to the insulation of the individual
components can be fatal.
— Have all work on the electrical equipment performed by skilled
electricians.
—
In the event of damage to the insulation, cut off the power
supply immediately and initiate repairs.
— Before working on live components of electrical systems and
equipment, de-energize these components and secure them
in this state for the duration of the work. Adhere to the fol-
lowing safety rules in this regard:
— Disconnect.
— Secure against restart.
— Verify that components have been de-energized.
— Ground and short-circuit.
— Cover or shield any adjacent live components.
— Never bypass or disable any fuses. Comply with the correct
amperage specification when replacing fuses.
— Keep moisture away from all live components. This may lead
to short circuits.
Instructions and safety regulations
—
Pay attention to all the instructions and safety regulations con-
tained in the operating manuals for electronic components in
the appendix.
Electrical connection
Transportation, Storage and Installation
BA-Classic FL_en-US, 03.05.2018www.boerger.de / www.boerger.com74
To Next Page
Loading...