Personnel:
n
Qualified electricians
Protective equip-
ment:
n
Occupational safety clothing, chemical
resistant
n
Safety shoes
n
Safety gloves, chemical-resistant
n
Safety goggles
Special tool:
n
T
ools for electrical work
— Read and follow the safety instructions detailed in
Ä
Chapter
2.12 “Safety instructions for maintenance and rectifying mal-
functions” on page 30.
— To the extent necessary, amply secure the surrounding area
when performing installation. Cordon off the working area with
a red and white safety chain and a warning sign.
1. Connect all electrical monitoring devices according to the
operating manuals from the manufacturers.
2. Connect the drive on versions with an electric drive
according to the operating manual from the manufacturer
.
3. Ground the Börger machine properly
, see operating manual
of the drive manufacturer. Also use the bore hole for the
ground terminal.
Transportation, Storage and Installation
BA-Classic FL_en-US, 03.05.2018 www.boerger.de / www.boerger.com 75
To Next Page
Loading...