Never stand under suspended loads.
At the start of maintenance, repairs or machine care, clean any dirt
or cleaning agents of
f the connections and screw connections. Do
not use any aggressive cleaning agents. Use lint-free cleaning
cloths.
During installation, always tighten any screw connections that have
been loosened for maintenance and repair work. Tighten to the
prescribed torque, where this is specified.
Dispose of operating materials and replacement parts in a safe
and environmentally-friendly manner.
WARNING!
Risk of injury due to inadequate troubleshooting, mainte-
nance and repair work!
Inadequate troubleshooting, maintenance and repair work can
lead to severe injury and significant damage to property.
— Ensure sufficient installation space before commencing work.
— Keep the installation site clean and tidy! Loosely stacked or
scattered components and tools cause accidents.
— Ensure correct installation where components have been
removed, reinstall all fastening elements and observe the
tightening torques of screws.
— Ensure the following before putting the machine back into
operation:
— Ensure that all troubleshooting, maintenance and repair
work is performed and completed as per the information
and notes provided in this manual.
— Ensure that nobody enters the hazardous area.
— Ensure that all covers and safety features are installed
and function correctly.
Safety
BA-Classic FL_en-US, 03.05.2018 www.boerger.de / www.boerger.com 31
To Next Page
Loading...