Maintenance and troubleshooting on the electrical system
Personnel:
n
Qualified electricians
Protective equip-
ment:
n
Occupational safety clothing, chemical
resistant
n
Safety shoes
n
Safety gloves, chemical-resistant
n
Safety goggles
Special tool:
n
T
ools for electrical work
— The electrical system may only be opened, maintained and
repaired by qualified electricians, while having proper regard to
the attached electric circuit diagrams.
—
Suitable workshop equipment is essential for carrying out main-
tenance work. In particular, only insulated electrician’s tools
may be used on live parts.
1. Also observe any
— supplementary operating manuals
—
operating manuals of the components
in the appendix.
2. Adhere to the prescribed intervals for regular maintenance
and inspections or those specified herein and in the operating
manuals of the components.
3. Carry out modifications, repairs, maintenance and trouble-
shooting on the control unit only when the electrical system is
switched of
f. Accidental restarting of the unit must be pre-
vented completely.
4. T
o the extent necessary, amply secure the surrounding area
when performing maintenance. Cordon off the working area
with a red and white safety chain and a warning sign.
5. Carefully attach and secure large assemblies and compo-
nents to hoists when they are removed or replaced so that
associated dangers are minimized. Only appropriate hoists
and lifting media in technically perfect working condition with
suf
ficient load capacities may be used.
6. Never stand under suspended loads.
Safety
BA-Classic FL_en-US, 03.05.2018www.boerger.de / www.boerger.com34
To Next Page
Loading...