Personnel:
n
Mechanics
Protective equipment:
n
Occupational safety clothing, chemical
resistant
n
Safety shoes
n
Safety gloves, chemical-resistant
n
Safety goggles
Special tool:
n
T
ools, general
— Read and follow the safety instructions detailed in
Ä
Chapter
2.12 “Safety instructions for maintenance and rectifying mal-
functions” on page 30.
— To the extent necessary, amply secure the surrounding area
when performing installation. Cordon off the working area with
a red and white safety chain and a warning sign.
1. Clean all connection flanges and all other connections before
installation and ensure that they are not damaged.
2. On flange connections, ensure that the flanges are positioned
exactly face to face, even without being fixed by screws.
They must not be inclined, nor pressed together
, nor spring
backwards due to tensile forces.
3. Prevent any stress on the pipes connected to the Börger
machine by taking suitable measures.
4. Use seals that are suitable for the connections.
5. Install the connections to the matching pieces on the pipes or
hoses without stress. When necessary
, apply the appropriate
torque for the connection. Consult the manufacturer's instruc-
tions for coupling connections.
Transportation, Storage and Installation
BA-Classic FL_en-US, 03.05.2018www.boerger.de / www.boerger.com70
To Next Page
Loading...