Personnel:
n
Mechanics
Protective equipment:
n
Occupational safety clothing, chemical
resistant
n
Safety shoes
n
Safety gloves, chemical-resistant
n
Safety goggles
Special tool:
n
T
ools, general
— Read and follow the safety instructions detailed in
Ä
Chapter
2.12 “Safety instructions for maintenance and rectifying mal-
functions” on page 30.
— To the extent necessary, amply secure the surrounding area
when performing installation. Cordon off the working area with
a red and white safety chain and a warning sign.
1. On versions with a PTO shaft drive, ensure that the drive
side of the PT
O shaft is properly connected to the drive.
2. Connect the suitable PT
O shaft - which has to be mounted
properly to the drive - with the corresponding shaft end of the
Börger machine according to the operating manual from the
PTO shaft manufacturer.
3. Check the length of the PT
O shaft and adjust it if necessary.
Transportation, Storage and Installation
BA-Classic FL_en-US, 03.05.2018www.boerger.de / www.boerger.com78
To Next Page
Loading...