To Next PageTo Next Page
Need help?Do you have a question about the Bosch 3912 and is the answer not in the manual?
General safety rules for benchtop tools, covering work area, electrical, and personal safety.
Specific safety rules for operating miter saws to prevent injury.
Precautions related to electrical connections and safety.
Procedure for safely removing and installing the saw blade.
Procedure to ensure the blade is square to the table at 90 degrees.
How to set the blade to a 45-degree bevel angle relative to the table.
How to align the blade square to the fence.
Proper posture and hand placement for safe and easy cutting.
How to operate the safety buttons and trigger for starting the saw.
How to perform miter cuts at various angles using detents or scale.
Procedure for making cuts at different bevel angles.
Performing cuts that require both miter and bevel adjustments.
Techniques for cutting crown molding accurately.
Cutting crown molding with the piece laid flat on the saw table.
Cutting crown molding at an angle to the table and fence.
Step-by-step guide to inspect or replace motor brushes.
Troubleshooting common electrical problems with the saw.
Troubleshooting common mechanical and operational issues.
General