Bypassing
Bypassing/Unbypassing Zones
One or more zones can be disabled for one arming cycle. After
bypassing a zone, you can arm the system even when a zone is
in alarm state.
How to Bypass/Unbypass a Zone via Text Keypad
1.
Enter your code + [3] [1] and press [#].
The STAY indicator flashes fast. The available zones are
shown. Already bypassed zones are checked. Unavailable
zones are marked with an x.
2. Use [▲] and [▼] to display all zones.
3. Enter the two-digit zone number you wish to bypass/
unbypass.
The selected zone is checked/unchecked.
4. Repeat step 3 if you want to bypass/unbypass multiple
zones.
5. Press [#] to confirm.
6. Press [#] to exit.
How to Bypass/Unbypass a Zone via LED/LCD
Keypad
1. Enter your code + [3] [1] and press [#].
The STAY indicator flashes fast. The lit number indicators
show the bypassed zones. If no numbers are lit, no zones
are bypassed yet.
2. Enter the zone number you want to bypass/unbypass.
3. Press [*].
The system beeps twice. The corresponding number
indicator is lit/extinguished.
4. Repeat step 2 if you want to bypass/unbypass multiple
zones.
6
6.1
6.1.1
6.1.2
26 en | Bypassing AMAX panel
2015.05 | 04 | F.01U.295.569 Bosch Sicherheitsysteme GmbH
To Next Page
Loading...
