Schedules
This function is used to schedule operations according to the
needs of the users. The following operations can be scheduled:
–
Arming/disarming
– Switching output on/off
– Activating/deactivating users
It is possible to schedule up to 16 operations on a daily or
hourly basis.
Please contact your installer to enable/disable this function.
How to activate/deactivate a schedule
1. Enter your code + [▼] until you reach SYSTEM SETTINGS.
2. Press [#] + [▼] until you reach SCHEDULE ENABLE.
3. Press [#].
4. Select SCHED ENABLE and press [#].
The available schedules are shown. Already selected
schedules are checked.
5. Use [▲] and [▼] to display all schedules.
6. Enter the two-digit schedule number you wish to activate/
deactivate.
The selected schedule is checked/unchecked.
7. Repeat step 6 if you want to activate/deactivate multiple
schedules.
8. Press [#].
9. Press [-] twice to exit.
7
28 en | Schedules AMAX panel
2015.05 | 04 | F.01U.295.569 Bosch Sicherheitsysteme GmbH
To Next Page
Loading...
