Domestic Dialing
Domestic Dialing Alarm
When a zone tamper or zone alarm is activated, the control
panel can dial a phone number of a contact person through the
onboard voice dialer module. A maximum of four numbers can
be dialed by the control panel during an alarm.
Indication of Domestic Call Alarm:
Domestic call 1 (1 alarm tone or recorded voice message)
Domestic call 2 (2 alarm tone or recorded voice message)
Domestic call 3 (3 alarm tone or recorded voice message)
Domestic call 4 (4 alarm tone or recorded voice message)
The voice messages are recorded with A-Link Plus and are
transferred via A-Link Plus to the AMAX panel.
Please contact your installer to enable/disable this function.
Confirming the Domestic Call
All alarm events need acknowledgement. The transmission
sequence is repeated until the control panel receives an
acknowledgement tone. The control panel automatically closes
the line after 45 seconds if it can not detect the
acknowledgement tone and redial later.
4 Press [#] between two acknowledgement tones to confirm
the alarm.
P The system beeps for two seconds and closes the line.
11
11.1
11.2
36 en | Domestic Dialing AMAX panel
2015.05 | 04 | F.01U.295.569 Bosch Sicherheitsysteme GmbH
To Next Page
Loading...
Need help?
General
